Complete Guide of Custom Settings Menu of Nikon DSLR | Nikon D5300 | Part - 1
NIKON D5300 CUSTOM SETTINGS MENU | COMPLETE GUIDE
Hello,I'm Anirban Adhikary. I'm a freelance photographer. Today this article based on the Custom Settings of Nikon DSLR.
How to get to the CUSTOM MENU ?
Press MENU, click left and then up and down to select the pencil icon (CUSTOM SETTING) menu. You'll see "CUSTOM SETTING MENU" on the top of the LCD monitor.
What it Sets ?
What it Sets ?
It sets thing having to do with the camera's mechanical settings, like for autofocus and setting what buttons do what.
What I Change ?
What I Change ?
I change a lot of little details here.
Reset Custom Settings ?
Reset Custom Settings ?
This resets everything below back to factory defaults, so play with these all you want without fear.
a1 AF-C priority selection
a1 AF-C priority selection
By default, the FOCUS selection ensures that all your pictures will be in focus in AF-C (continuous AF) mode. If the subject is moving fast, the D5300 may run a bit slower as it tries to focus properly for each frame. If you'd prefer the D5300 to run full-speed and shoot even if it's not in focus, choose RELEASE instead. I never use this; why would I want out-of-focus pictures?
a2 Number of focus points
This lets you set the D5300 to use only 11 autofocus points instead of all 39. The only reason you might want to do this is to take fewer clicks to select among the AF areas.
a3 Built-in AF-assist illuminator
a2 Number of focus points
This lets you set the D5300 to use only 11 autofocus points instead of all 39. The only reason you might want to do this is to take fewer clicks to select among the AF areas.
a3 Built-in AF-assist illuminator
This lets you turn off the AF assist light so you won't annoy people in the dark, but if you do, don't expect the D5300 to be able to focus in total darkness.
a4 Rangefinder
In addition to the viewfinder's focus-confirmation dot, this activates a simple bar graph at the bottom to help with manual focusing.
b1 EV steps for exposure control.
This sets half- or third-stop steps for setting exposures. I leave it at 1/3.
c1 Shutter release button AE-L
If you want the exposure to lock when you half-press the shutter, set this to ON. I leave it at its default of OFF; I use the AE-L AF-L button when I want to lock exposure, and let the shutter button lock only the focus, which it does by default.
c2 Auto off timers
This is where you may change the amount of time the various functions of the D5300 stay awake, like the LCD, after they've been used. Making these longer may be more convenient, but also can run down the battery more quickly.
Go to CUSTOM and you can set just about everything. Set these to the shortest times that don't have them turning off as you use them. I leave these at their defaults.
c3 Self-timer
Here you can set the delay of the self-timer to 2, 5, 10 or 20 seconds. You also can set it to make up to 9 shots when it does go off. By having it make a few shots each time it fires, you're much more likely to get a good shot of your group. I leave this alone.
c4 Remote on duration (ML-L3)
When you set the Release mode to either of the remote-release settings, the D5300 has to stay turned-on, waiting for the signal from the remote. You can set this to longer times, and likewise, the batteries will run down faster.
If you set the D5300 to expect a signal from the remote control and it sits longer than the number of minutes you've set, the D5300 goes back to sleep and ignores the remote control. I leave this alone.
d1 Beep
For goodness' sake, please turn this OFF. Otherwise the D5300 makes all sorts of inappropriate beeps as it functions.
Cameras should be seen and not heard.
d2 Viewfinder grid display
Set this ON, and a rectangular grid appears in the finder to help you take level shots.
I leave this OFF.
d3 ISO display
Set this ON, and the ISO (as well as the automatically-set AUTO ISO) will show instead of the frame counter in the finder. I set this to ON.
This lets you ensure that your new pictures don't start from DSC_0001.JPG every time you format your card. If they did, you'd have hundreds of photos all named DSC_0004.JPG on your computer as time went on!
ON : Files keep counting up. I use this.
OFF (default): Files start at 0001 on each new or reformatted card. Don't use this because these files will become impossible to sort among later on your computer.
Reset : Starts counting again at the lowest possible number.
d5 Exposure delay mode
For use with very long telephoto lenses on tripods, this delays the shutter from firing until about a second after the mirror has flipped up.
Use this if you're on a tripod with a long (200mm or longer) lens between about 1/60 and 1 second. At faster or slower speeds, or with a shorter lens, it won't matter. This is a smarter way of doing mirror lock-up.
d6 Print date
This permanently burns-in the date, time or other items selected in this menu onto your image.
This isn't the invisible data in the file's EXIF information; this sets data to be drawn over the image that you'll see in every print or other use. You'll need Photoshop to repair your images if you leave this on by accident, or forget to set the camera to or from daylight savings time.
e1 Flash control for built-in flash
This sets what the built-in pop-up flash does.
TTL is normal : the flash works as it should
MANUAL forces the flash to work at only one preset power level. Use this only if you have a fixed setup and need to get just one specific level of flash.
e2 Auto bracketing set
This sets what changes as the camera brackets.
The only way to engage bracketing is on the INFO screen via the i button.
f1 Assign Fn button
This sets what the Fn button does.
It's set to ISO by default.
I set mine to AF Area Mode.
f2 Assign AE-L/AF-L button
The AE-L/AF-L button is on the top right of the back of the camera. I set mine to AE lock only, preferring to use the shutter button to lock my focus.
f3 Reverse dial rotation
This makes the rear dial work in the other direction.
If you don't need compatibility among all your Nikons for the past 60+ years, feel free to set these ON so things seem to go in the correct direction.
Back in the 1940s, no one at Nikon envisioned the electronic dials or through-the-lens meters we take for granted today.
f4 Slot empty release lock
This prevents us from taking pictures with no card in the camera.
Leave it at LOCK.
If you want to play with your camera with no card, set it to OK. This mode is only here so that Wal-Mart can put cameras out on display and have them work with no card; you would never want to set your camera to OK because you could shoot all day without a card in the camera!
f5 Reverse indicators
This lets you make the in-finder bar graph read correctly.
Nikons' bar graphs and even mechanical in-finder meters have always read backwards since they were created in the 1960s! On every Nikon ever made, minus goes to the right, and positive goes to the left.
This is because the Nikon F and all of Nikon's SLR system was designed as a simple extrapolation Nikon , which were designed in the 1940s, when very few people even owned a light meter.
The shutter dials and aperture rings of Nikon's newest cameras still turn in the same direction as they did on Nikon's very first cameras of the 1940s.
When Nikon introduced in-camera light meters in the 1960s, the needles were designed to go in the logical direction as you turned the rings and dials: positive went to the left.
Even after Nikon did away with shutter dials and aperture rings on their cheaper cameras in the 1990s and 2000s, the bar graphs still go the wrong way.
Now that your D5300 has no shutter dial and your G lenses have no aperture ring, you can set this straight once and for all.
Of course the rear dial of the D5300 still works in the same directions as Nikon's 1940s cameras, so if you chose this option, be sure to select set f3 Reverse dial rotation above to ensure the bar graphs follow the dials.
***************************************************************
a4 Rangefinder
In addition to the viewfinder's focus-confirmation dot, this activates a simple bar graph at the bottom to help with manual focusing.
b1 EV steps for exposure control.
This sets half- or third-stop steps for setting exposures. I leave it at 1/3.
c1 Shutter release button AE-L
If you want the exposure to lock when you half-press the shutter, set this to ON. I leave it at its default of OFF; I use the AE-L AF-L button when I want to lock exposure, and let the shutter button lock only the focus, which it does by default.
c2 Auto off timers
This is where you may change the amount of time the various functions of the D5300 stay awake, like the LCD, after they've been used. Making these longer may be more convenient, but also can run down the battery more quickly.
Go to CUSTOM and you can set just about everything. Set these to the shortest times that don't have them turning off as you use them. I leave these at their defaults.
c3 Self-timer
Here you can set the delay of the self-timer to 2, 5, 10 or 20 seconds. You also can set it to make up to 9 shots when it does go off. By having it make a few shots each time it fires, you're much more likely to get a good shot of your group. I leave this alone.
c4 Remote on duration (ML-L3)
When you set the Release mode to either of the remote-release settings, the D5300 has to stay turned-on, waiting for the signal from the remote. You can set this to longer times, and likewise, the batteries will run down faster.
If you set the D5300 to expect a signal from the remote control and it sits longer than the number of minutes you've set, the D5300 goes back to sleep and ignores the remote control. I leave this alone.
d1 Beep
For goodness' sake, please turn this OFF. Otherwise the D5300 makes all sorts of inappropriate beeps as it functions.
Cameras should be seen and not heard.
d2 Viewfinder grid display
Set this ON, and a rectangular grid appears in the finder to help you take level shots.
I leave this OFF.
d3 ISO display
Set this ON, and the ISO (as well as the automatically-set AUTO ISO) will show instead of the frame counter in the finder. I set this to ON.
This lets you ensure that your new pictures don't start from DSC_0001.JPG every time you format your card. If they did, you'd have hundreds of photos all named DSC_0004.JPG on your computer as time went on!
ON : Files keep counting up. I use this.
OFF (default): Files start at 0001 on each new or reformatted card. Don't use this because these files will become impossible to sort among later on your computer.
Reset : Starts counting again at the lowest possible number.
d5 Exposure delay mode
For use with very long telephoto lenses on tripods, this delays the shutter from firing until about a second after the mirror has flipped up.
Use this if you're on a tripod with a long (200mm or longer) lens between about 1/60 and 1 second. At faster or slower speeds, or with a shorter lens, it won't matter. This is a smarter way of doing mirror lock-up.
d6 Print date
This permanently burns-in the date, time or other items selected in this menu onto your image.
This isn't the invisible data in the file's EXIF information; this sets data to be drawn over the image that you'll see in every print or other use. You'll need Photoshop to repair your images if you leave this on by accident, or forget to set the camera to or from daylight savings time.
e1 Flash control for built-in flash
This sets what the built-in pop-up flash does.
TTL is normal : the flash works as it should
MANUAL forces the flash to work at only one preset power level. Use this only if you have a fixed setup and need to get just one specific level of flash.
e2 Auto bracketing set
This sets what changes as the camera brackets.
The only way to engage bracketing is on the INFO screen via the i button.
f1 Assign Fn button
This sets what the Fn button does.
It's set to ISO by default.
I set mine to AF Area Mode.
f2 Assign AE-L/AF-L button
The AE-L/AF-L button is on the top right of the back of the camera. I set mine to AE lock only, preferring to use the shutter button to lock my focus.
f3 Reverse dial rotation
This makes the rear dial work in the other direction.
Nikon's dials work backwards today because their directions have never changed since Nikon's first 1940's rangefinder cameras.
If you don't need compatibility among all your Nikons for the past 60+ years, feel free to set these ON so things seem to go in the correct direction.
Back in the 1940s, no one at Nikon envisioned the electronic dials or through-the-lens meters we take for granted today.
f4 Slot empty release lock
This prevents us from taking pictures with no card in the camera.
Leave it at LOCK.
If you want to play with your camera with no card, set it to OK. This mode is only here so that Wal-Mart can put cameras out on display and have them work with no card; you would never want to set your camera to OK because you could shoot all day without a card in the camera!
f5 Reverse indicators
This lets you make the in-finder bar graph read correctly.
Nikons' bar graphs and even mechanical in-finder meters have always read backwards since they were created in the 1960s! On every Nikon ever made, minus goes to the right, and positive goes to the left.
This is because the Nikon F and all of Nikon's SLR system was designed as a simple extrapolation Nikon , which were designed in the 1940s, when very few people even owned a light meter.
The shutter dials and aperture rings of Nikon's newest cameras still turn in the same direction as they did on Nikon's very first cameras of the 1940s.
When Nikon introduced in-camera light meters in the 1960s, the needles were designed to go in the logical direction as you turned the rings and dials: positive went to the left.
Even after Nikon did away with shutter dials and aperture rings on their cheaper cameras in the 1990s and 2000s, the bar graphs still go the wrong way.
Now that your D5300 has no shutter dial and your G lenses have no aperture ring, you can set this straight once and for all.
Of course the rear dial of the D5300 still works in the same directions as Nikon's 1940s cameras, so if you chose this option, be sure to select set f3 Reverse dial rotation above to ensure the bar graphs follow the dials.
***************************************************************
Please Like, Share & Subscribe. Don't forget to do comments.
Complete Guide of Custom Settings Menu of Nikon DSLR | Nikon D5300 | Part - 1
Reviewed by Anirban Adhikary Photography
on
February 12, 2020
Rating:
Reviewed by Anirban Adhikary Photography
on
February 12, 2020
Rating:
No comments: